 | HP Compaq 6715b Notebook PC
Workstation Hewlett Packard Company | 12 Sep 2007
91521 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® LINUX Enterprise Desktop 10 for x86 Service Pack 1 for SUSE® SLED 10 |
Product Description
Refer to http://www.hp.com for more details
Tested Configuration:
| Computer Type: | Laptop |
| Mother Board Revision: | 0x30c2 |
| BIOS: | F.07 |
| CPU: | AMD Turion™ 64 X2 Mobile Technology TL-60 2.0 GHz |
| RAM: | 1024 MB |
| Bus Type: | 1394 Firewire CardBus 4 USB Ports |
| Video Adapter: | AMD Radeon™ X1250 |
| Desktop Effect Enabled: | Yes |
| Power Management: | Yes |
| Host Bus Adapter: | ATI® SB600 , Serial ATA (SATA) |
| Hard Disk Drive: | Hitachi GST TravelStar HTS541680J9SA00 80GB , Serial ATA (SATA) |
| CD/DVD: | Pioneer DVDRW DVR-K17 , IDE |
| Floppy Type: | Diskless |
| Test Kit: | System Certification Kit 6.1.0-0.28 |
Config Notes
| ** 2.10 (Install test) ** ATI Mobility Radeon X1250 graphics not detected during install. Went to ATI website, but Mobility Radeon section did not have X1250. Selected X1300, which points to "ATI Proprietary Linux x86 Display Driver 8.39.4." [drivers and software (find a driver) --> linux x86 / Mobility Radeon / Mobility Radeon X1300] [http://ati.amd.com/support/drivers/linux/linux-radeon.html]. Follow instructions at http://en.opensuse.org/Howto/ATI_Driver#Installation_-_Get_and_Install_ATI_Drivers (for SuSE/SLED10-IA32). Wireless LAN not tested due to lack of driver availability for Broadcom wireless LAN. ____ ** 2.14.3 (Suspend to disk) ** Hotkey (fn+f3) not supported, however "powersave -U" works and is supported. ____ ** 2.15.3 (Suspend to RAM) ** Hotkey (fn+f3) not supported, however "powersave -u" works after setting /etc/powersave/sleep: SUSPEND2RAM_FORCE:"yes" ____ ** 2.18.1 (Video Test) ** Connecting external monitor required a reboot while the monitor was connected. Using hotkey (fn+f4) does not cycle through modes (external, internal, dual), it only refreshed the external monitor. ____ ** 2.19 (Desktop Effects Test) ** The Activate 3D Acceleration box was greyed out but checked. Enable Desktop Effects button was not shown in Look and Feel section because 3D Acceleration was showing Disabled. Found instructions at http://en.opensuse.org/Using_Xgl_on_SUSE_Linux to set 3D Acceleration to Enabled by holding shift key and double clicking on Disabled next to 3D Acceleration. Click Enable Desktop Effects button then restart system. ____ ** 2.19 -> 2.14.3 (Suspend to Disk with Desktop Effects) ** Similar result as previous test (without Desktop Effects): "powersave -U" works. ____ ** 2.19 -> 2.15.3 (Suspend to RAM) ** Similar result as previous test (without Desktop Effects): "powersave -u" works. ____ ** 2.19 -> 2.18 (Video test) ** Same result as previous test (without Desktop Effects): restart was required to activate external monitor, and hotkey (Fn+f4) only refreshed external monitor instead of cycling through internal/external/dual modes. Overnight USB Port test was performed with one USB Hard Drive attached to the system. |
Adapters and Drivers
| AMD Radeon™ X1250 | |||||||||
| Driver Type: System Driver | File Name: fglrx_dri.so | ||||||||
| File Date: 30-Aug-2007 | File Size: 10331281 | ||||||||
| Checksum: 999509dcc82371209516738ac1e9ccf3 | |||||||||
|
|
|||||||||
| Broadcom® BCM5787M NetLink Gigabit Ethernet Controller | |||||||||
| Driver Type: LAN Driver | File Name: tg3.ko | ||||||||
| File Date: 18-May-2007 | File Size: 117708 | ||||||||
| Checksum: cd28263a64698fff1abaf368caf7dca7 | |||||||||
|
|
|||||||||
| ATI® SB600 | |||||||||
| Driver Type: HBA Driver | File Name: ahci.ko | ||||||||
| File Date: 18-May-2007 | File Size: 33248 | ||||||||
| Checksum: ea7e75d035d1af7a259373a1c03906cb | |||||||||
|
|
|||||||||
| Driver Type: HBA Driver | File Name: atiixp.ko | ||||||||
| File Date: 18-May-2007 | File Size: 12124 | ||||||||
| Checksum: 609235d3857c25feaccb2b5c38761f2f | |||||||||
|
|
|||||||||
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
Hewlett Packard Company
Personal Systems Group - Notebooks
20555 SH249
Houston , TX 77070
Website: http://www.hp.com