 | ETERNUS LT270
TAPE DRIVE Fujitsu Siemens Computers | 05 Jul 2007
90727 |
YES CERTIFIED with the following products:
Operating Systems:
| Open Enterprise Server Support Pack 2 for Open Enterprise Server |
| SUSE® LINUX Enterprise Server 9 for x86 Service Pack 3 for SUSE® SLES 9 |
Product Description
Whether you are in the public or private sector, not only are data volumes continuing to grow, but organizations are also seeing more and more value in their data assets. In such situations, your information-system department is under greater pressure to secure that data through timely backup and the ensuring of data integrity through prevention of falsification and top class data management. ETERNUS LT270 as a high reliability large-scale tape library meets such requirements. Large scalability comes from ETERNUS LT270 tape library's ability to store a maximum of 709 cartridges in a single cabinet. Use of LTO Ultrium 3 tape drives and cartridges means highest possible performance. 160MB/sec data transfer speeds, redundancy in tape robot carriers, and data security from WORM technology mean timely, secure, stable, and continuous data management. For more detailed information please refer to http://www.fujitsu.com/global/services/computing/storage/tape/lt270/spec/
Primary Driver File(s):
| File Name: qla2xxx.ko | File Version: 8.01.02-sles | |||||
| File Date: 02-Dec-2006 | File Size: 404716 | |||||
| Checksum: 8c3c86f72a0db4b8fcc0354d89dba134 | ||||||
| File URL: | ||||||
Driver Support File(s)
Tape Drive
| Product Name | ETERNUS LT270 |
| Firmware: | V20L31 |
| Interface: | FibreChannel |
Tested Configuration
| Host Bus Adapter: | QLogic QLA2340 64-Bit PCI-X to 2-Gigabit Fibre Channel Adapter , Adapter Bus Type: PCI-X , Channels: 2 , Interface: FibreChannel |
| System: | FSC PRIMERGY® RX100 S3 |
| Test Kit: | DiskKit 5.01.23 - 2007-02-08 |
Config Notes
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, quick erase, security erase, retension. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, locate data blocks. |
| Tape spanning supported |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu Siemens Computers
FSC IP STB
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY