 | QLA2310F 2Gbps Single Port Fibre Channel to PCI-X HBA
Device Driver / Host Bus Adapter QLogic Corporation | 19 Dec 2006
87405 |
YES CERTIFIED with the following products:
Operating Systems:
| NetWare® 6.5 |
Product Description
Based on QLogic's award-winning Fibre Channel architecture, the QLA2310F Series are 64-bit, 66 MHz PCI-X to 2-Gigabit Fibre ChanneL Host BuS Adapters. Targeted specifically for Storage Area Networks (SANs) and server clustering environments, the QLA2310F Series has been optimized for peak performance and real-world scalability.
Primary Driver File(s):
Driver Support File(s)
| File Name: SCSIHD.DDI | File Version: 3.00 | |||||
| File Date: 06-Jul-2005 | File Size: 30108 | |||||
| Checksum: | ||||||
| File URL: | ||||||
| File Name: QL2X00.DDI | File Version: 2.09 | |||||
| File Date: 23-Mar-2006 | File Size: 29855 | |||||
| File URL: | ||||||
Host Bus Adapter(s)
| Product Name | QLA2310F 2Gbps Single Port Fibre Channel to PCI-X HBA |
| Version: | 04 A |
| Interface: | FibreChannel |
| Bus Type: | 64-bit PCI-X |
| Chipset: | ISP2310 |
| BIOS: | 1.52 |
| Firmware: | 3.03.21 |
| Channels: | 1 |
Tested Configuration:
| Hard Disk Drive: | 2 SGI® ST336753FC , Firmware: 0005 , Interface: FibreChannel |
| Switching System: | QLogic SANbox 5602 4Gb Fibre Channel Switch , Interface: FibreChannel , Firmware: v5.0.1.10 , Switch Speed: 4Gb , Switch Ports: 20 |
| Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
| 'Hardware Hot Plug' supported but was not tested. |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
26650 Aliso Viejo Parkway
P.O. Box 5033
Aliso Viejo , CA 92656
Voice: 949-389-6000
Fax: 949-389-6009
Website: http://www.qlogic.com