 | QLE2360 PCI Express to 2-Gigabit Fibre Channel
Device Driver / Host Bus Adapter QLogic Corporation | 07 Aug 2006
85177 |
YES CERTIFIED with the following products:
Operating Systems:
| NetWare® 6.5 |
Product Description
The QLE2360 HBA is an intelligent, high-performance host bus adapter designed for the next generation serial host bus called PCI Express. The QLE2360 HBA is a single-slot PCI Express bus expansion board that interfaces a four-lane PCI Express bus to FC optical media bus. It supports one-, two-, and four-lane operations on the host bus and supports all FC peripherals that support private loop direct attach (PLDA) and fabric loop attach (FLA). Installation of the QLE2360 HBA is quick and easy. The QLE2360 provides a level of performance and flexibility that is unsurpassed in the storage industry.
Primary Driver File(s):
Driver Support File(s)
| File Name: SCSIHD.DDI | File Version: 3.00 | |||||
| File Date: 06-Jul-2005 | File Size: 30108 | |||||
| Checksum: | ||||||
| File URL: | ||||||
| File Name: QL2X00.DDI | File Version: 2.09 | |||||
| File Date: 23-Mar-2006 | File Size: 29855 | |||||
| File URL: | ||||||
Host Bus Adapter(s)
| Product Name | QLE2360 PCI Express to 2-Gigabit Fibre Channel |
| Version: | 01 B |
| Interface: | FibreChannel |
| Bus Type: | PCI Express X4 |
| Chipset: | ISP2322 |
| BIOS: | 1.05 |
| Firmware: | 3.03.20 |
| Channels: | 1 |
Tested Configuration:
| Hard Disk Drive: | 2 Seagate® ST336753FC , Firmware: 0005 , Interface: FibreChannel |
| Switching System: | QLogic SANbox 5602 4Gb Fibre Channel Switch , Interface: FibreChannel , Firmware: 5.0.0.27.0 |
| Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
| 'Hardware Hot Plug' supported but was not tested. |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
26650 Aliso Viejo Parkway
Aliso Viejo , CA 92656
Voice: 949-389-6000
Fax: 949-389-6009
Website: http://www.qlogic.com