QLA2342 Dual Channel 2Gb Fibre Channel to 133MHz PCI-X HBA Device Driver / Host Bus Adapter QLogic Corporation 24 Mar 2006 83664 YES CERTIFIED with the following products: Operating Systems:   NetWare® 6.5 Product Description Based on QLogic's award-winning Fibre Channel architecture, the SANblade QLA2342 is a 64-Bit, 66 MHz PCI/133 MHz PCI-X to 2-Gigabit Fibre Channel Host Bus Adapter. Targeted specifically for Storage Area Network (SANs) and server clustering environments, the SANblade QLA2342 has been optimized for peak performance and real-world scalability. Primary Driver File(s): QL2X00.HAM  ( 530179 bytes   17-Mar-2006 14:40   6.90i    )    SCSIHD.CDM  ( 32119 bytes   29-Nov-2005 15:28   3.03e    )    Driver Support File(s) QL2X00.DDI  ( 29855 bytes   23-Mar-2006 13:30   2.09) SCSIHD.DDI  ( 30108 bytes   06-Jul-2005 16:53   3.00) Host Bus Adapter(s) Product Name QLA2342 Dual Channel 2Gb Fibre Channel to 133MHz PCI-X HBA Version: B Interface: FibreChannel Bus Type: 64-bit PCI-X Chipset: ISP2312 BIOS: 1.43 Firmware: 3.02.28 Channels: 1 Tested Configuration: Hard Disk Drive: 2 Seagate®  ST336854FC , Firmware: 0003 , Interface: FibreChannel System: Intel®  SE7520BD2V - SC5300 , Bus Type: PCI Switching System: QLogic  SANbox 5602 4Gb Fibre Channel Switch , Interface: FibreChannel , Firmware: v5.0.0.27.0 , Switch Speed: 4Gb , Switch Ports: 20 Test Kit: Diskkit 4.05.01 - 02-17-2006 Config Notes 'Hardware Hot Plug' supported but was not tested. The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo , CA   92656 Voice: 949-389-6000 Fax: 949-389-6009 Website: http://www.qlogic.com