QLA210 PCI-X to 2-Gigabit Device Driver / Host Bus Adapter QLogic Corporation 24 Mar 2006 83662 YES CERTIFIED with the following products: Operating Systems:   NetWare® 6.5 Product Description The QLA210 is a Low-Price, RoHS compliant, extremely easy to use SANblade HBA offering 20,000 IOPs at 2 Gbps FC speeds. It supports 133MHz PCI-X host bus and is fully backward compatible with 33/66 MHz PCI and 66/100 MHz PCI-X. The QLA210 is a reliable, scalable, resilient HBA based on a fully integrated single-chip solution; with integrated RISC that completely offloads Host CPU. Primary Driver File(s): QL2X00.HAM  ( 530179 bytes   17-Mar-2006 14:40   6.90i    )    SCSIHD.CDM  ( 32119 bytes   29-Nov-2005 15:28   3.03e    )    Driver Support File(s) QL2X00.DDI  ( 29855 bytes   23-Mar-2006 13:30   2.09) SCSIHD.DDI  ( 30108 bytes   06-Jul-2005 16:53   3.00) Host Bus Adapter(s) Product Name QLA210 PCI-X to 2-Gigabit Version: 23 A Interface: FibreChannel Bus Type: PCI Chipset: SP202 BIOS: 1.23 Firmware: 3.03.10 Channels: 1 Tested Configuration: Hard Disk Drive: 2 Seagate®  ST336753FC , Firmware: 0005 , Interface: FibreChannel System: Dell  PowerEdge 2800 /2-Xeon™ DP 3.20 GHz Switching System: QLogic  SANbox 5602 4Gb Fibre Channel Switch , Interface: FibreChannel , Firmware: v5.0.0.27.0 , Switch Speed: 4Gb , Switch Ports: 20 Test Kit: Diskkit 4.05.01 - 02-17-2006 Config Notes 'Hardware Hot Plug' supported but was not tested. The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo , CA   92656 Voice: 949-389-6000 Fax: 949-389-6009 Website: http://www.qlogic.com