 | HP ProLiant™ DL385 2.2 GHz
Network Server Hewlett Packard Company | 07 Nov 2005
82498 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 8 for AMD64® Support Pack 4 for SUSE® SLES 8 |
Product Description
Additional Supported Processor Speeds: Model 265 (1.8GHz), 270 (2.0 GHz dual core), 280 (2.4 GHz dual core). For more information please visit http://www.hp.com
Tested Configuration:
| Product/Model: | HP ProLiant™ DL385 2.2 GHz |
| CD/DVD: | HP CD-224E , ATAPI |
| CPU: | 2 AMD Opteron™ model 275 |
| Hard Disk Drive: | 2 HP DG036A8B53, 36 GB, SAS , Serial SCSI (SAS) |
| Host Bus Adapter: | AMD
Integrated AMD 8111
, UltraATA-100 HP Smart Array P600 , Serial SCSI (SAS) |
| Video Adapter: | ATI® Integrated RAGE™ XL |
| BIOS: | A05 - 06/14/2005 |
| Bus Type: | Serial 3 USB Ports 2 64-bit/100MHz PCI-X 64-bit/133MHz PCI-X |
| Computer Type: | Rack Mount |
| Floppy Type: | NONE |
| Mother Board Revision: | G1 |
| RAM: | 1024 MB |
| Test Kit: | System Test Kit 4.2.6 |
Config Notes
| NEEDED: kernel boot parameter "acpi=oldboot". |
| NEEDED: non-SuSE cciss driver updates, see below. |
| Initial installation must proceed as follows: |
| + First, install SLES-8 GA: |
| * Boot medium: United Linux 1.0 SP3 CD1 (!) |
| * To Utilize Additionally: SP3 cciss DUD provided by HP (this needs an auxiliary floppy drive, e.g. USB): cpq_cciss-2.4.54-14.ul10.amd64.dd.gz ; md5sum: 3ccddc592ca35ae84e16ab63e841c5ff |
| + Second, perform full Update to SP3 (e.g. via Patch CD) |
| + Finally, perform Update to SP4: |
| * Standard Patch-CD or online Update |
| * System is now temporarily unbootable. Therefore: _Immediately, prior to reboot:_ install SP4 cciss driver update RPM provided by HP (this is supposed to also properly adjust the boot configuration. Check!): cpq_cciss-2.4.56-6.sles8.amd64.rpm ; md5sum: 8151483b81767b24e3091cf2110d3ecc |
| * Then Reboot, in order to activate the SP4 kernel |
Adapters and Drivers
| Adapter | Driver Type | File Name | Date | Size | OS Version | ||||
| 2 Broadcom® Broadcom NetXtreme BCM5704 Gigabit | |||||||||
| AMD Integrated AMD 8111 | |||||||||
| HP Smart Array P600 | |||||||||
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
Hewlett Packard Company
Your local Hewlett-Packard
representative