 | ServeRAID-7e SATA HostRAID
Device Driver / Host Bus Adapter IBM | 03 Jun 2005
81073 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 9 for x86 Service Pack 1 for SUSE® SLES 9 |
Product Description
ServeRAID-7e uses integrated ICH(Sata) controller to enable Raid-0, Raid-1 configurations without requiring the use of an additional adapter.
Primary Driver File(s):
| File Name: aarich.ko | File Version: 4.0.53 | |||||
| File Date: 22-Apr-2005 | File Size: 374083 | |||||
| File URL: www.adaptec.com/ibm/downloads | ||||||
Driver Support File(s)
Host Bus Adapter(s)
| Product Name | ServeRAID-7e SATA HostRAID |
| Version: | v 4.0.53 |
| Interface: | Serial ATA (SATA) |
| Chipset: | ICH5R |
| BIOS: | 2.1-12 2109 |
| Firmware: | 2.1-12 2109 |
| Channels: | 2 |
Tested Configuration:
| CD/DVD: | IBM HL-DT-ST CD-ROM GCR-8482B , Interface: ATAPI |
| Hard Disk Drive: | 2 Seagate® ST380013 AS , Firmware: 3.05 , Interface: Serial ATA (SATA) |
| System: | IBM eServer xSeries 226 Model 8648-2BU , Interface: Serial ATA (SATA) , Bus Type: 64-bit/133MHz PCI-X , Memory: 512 MB |
| Test Kit: | System Test Kit 4.2.6 |
Config Notes
| SLES 9 - SP1: aarich is a driver update. Refer to the following url: www.adaptec.com/ibm/downloads |
| SLES 9 - SP1: Only SATA RAID-1 functionality of integrated controller tested during certification. |
| SLES 9 - SP1: To allow aarich raid driver to override the embedded sata driver; install using the following boot parameter: 'brokenmodules=ata_piix' |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com