 | Adaptec SCSI Card 29320ALP
Device Driver / Host Bus Adapter IBM | 05 Nov 2004
79200 |
YES CERTIFIED with the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 2 for NetWare® 6.5 |
| NetWare® 6 |
Product Description
The Adaptec SCSI Card 29320ALP is a low profile, 64-bit 133MHz PCI-X, single channel Ultra320 SCSI Card.
Primary Driver File(s):
| NWTAPE.CDM ( 68900 bytes 15-Oct-2003 12:03 PM 2.00n) |
| SCSIHD.CDM ( 28550 bytes 21-Apr-2004 11:00 AM 3.02.06) |
| SCSICD.CDM ( 22027 bytes 22-Apr-2003 03:00 PM 3.01a) |
| ADPU320.HAM ( 215854 bytes 06-Aug-2004 11:23 AM 3.01m) |
Driver Support File(s)
| ADPU320.DDI ( 7243 bytes 26-Aug-2003 01:53 PM 2.0) |
| NWTAPE.DDI ( 6888 bytes 22-Oct-2001 08:54 AM 1.00) |
| SCSIHD.DDI ( 29164 bytes 22-Oct-2003 02:52 PM 3.00) |
| SCSICD.DDI ( 7309 bytes 23-Jul-1998 10:28 AM 2.00) |
Host Bus Adapter(s)
| Product Name | Adaptec SCSI Card 29320ALP |
| Version: | B |
| Interface: | Ultra320 SCSI |
| Adapter Bus Type: | PCI |
| Chipset: | AIC-7901X |
| BIOS: | 4.30.1 |
| Firmware: | N/A |
Tested Configuration
| CD/DVD: | PLEXTOR CD-ROM PX-40TS |
| Hard Disk Drive: | Maxtor® ATLAS IV 18 WLS , Firmware: 0230 , Interface: Ultra160 SCSI |
| System: | Dell PowerEdge 4600 |
| Tape Drive: | Sony SDX-400C , Firmware: 0702 , Interface: Ultra160 SCSI |
| Test Kit: | Diskkit 4.04.10 - 09-17-2004 |
Config Notes
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape. |
| Tape spanning supported |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
6300 Diagonal Highway
Boulder , CO 80301
Voice: (303) 924-5839
Fax: (303) 924-4662