 | Smart Array 642 RAID Controller
RAID Controller Adapter Hewlett Packard Company | 02 Nov 2004
79183 |
YES CERTIFIED with the following products:
Operating Systems:
| NetWare® 5.1 Support Pack 7 for NetWare® 5.1 |
Product Description
The Smart Array 642 Controller (SA-642) is a 64-bit, 133-MHz PCI-X, dual channel, SCSI array controller for entry-level hardware-based fault tolerance. Utilizing both SCSI channels of the SA-642 allows you to configure up to 6 internal and 14 external hard drives to store up to 2.9 TB of storage.
RAID Controller Adapter
| Product Name | Smart Array 642 RAID Controller |
| Adapter Bus Type: | PCI |
| Firmware: | 2.26 |
| BIOS: | a |
| Interface: | Ultra320 SCSI |
| Channels: | 2 |
| Chipset: | 0046 |
Primary Driver File(s):
| CPQSHD.CDM ( 116063 bytes 22-Mar-2004 02:02 AM 2.02) |
| CPQRAID.HAM ( 199894 bytes 25-Oct-2004 02:12 AM 2.12) |
Driver Support File(s)
| CPQRAID.DDI ( 6301 bytes 25-Oct-2004 02:12 AM 2.12) |
| CPQSHD.DDI ( 8566 bytes 22-Mar-2004 02:02 AM 2.00) |
Tested Configuration:
| Product Name | Smart Array 642 RAID Controller |
| Hard Disk Drive: | HP
BF072863BA
, Interface: Ultra320 SCSI
, Firmware: HPB4
, Capacity: 72.8 GB HP LOGICAL VOLUME , Interface: Ultra320 SCSI , Firmware: 2.26 , Capacity: 72.8 GB |
| System: | HP Proliant ML350 G3 , Bus Type: PCI |
| Test Kit: | Diskkit 4.04.10 - 09-17-2004 |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Hewlett Packard Company
Your local Hewlett-Packard
representative