 | LSI53C1030
Device Driver / Host Bus Adapter LSI Logic, Inc. | 23 Sep 2004
78669 |
Tested and Approved with the following products:
Operating Systems:
| NetWare® 6 |
Product Description
LSI Logic PCI/PCI-X to Ultra320 SCSI Host Bus Adapter
Primary Driver File(s):
| LSIMPTNW.HAM ( 208273 bytes 29-May-2003 03:04 AM 3.04) |
| CPQSHD.CDM ( 112581 bytes 04-Mar-2003 01:59 AM 1.59) |
| NWTAPE.CDM ( 65192 bytes 02-Jan-2003 04:40 PM 2.00e) |
| SCSICD.CDM ( 17806 bytes 02-Nov-2001 09:54 AM 3.00d) |
Driver Support File(s)
| LSIMPTNW.DDI ( 34368 bytes 29-May-2003 03:04 AM 3.04.00) |
| CPQSHD.DDI ( 8570 bytes 04-Mar-2003 01:59 AM 1.58) |
| NWTAPE.DDI ( 6888 bytes 22-Oct-2001 08:54 AM 1.00) |
| SCSICD.DDI ( 7309 bytes 23-Jul-1998 10:28 AM 2.00) |
Host Bus Adapter(s)
| Product Name | LSI53C1030 |
| Version: | C.0 |
| Interface: | Ultra320 SCSI |
| Adapter Bus Type: | PCI |
| Chipset: | 53C1030 |
| BIOS: | 5.05.11 |
| Firmware: | 1.03.06 |
Test Configuration
| CD/DVD: | PLEXTOR CD-ROM PX-40TS , Firmware: 1.12 , Interface: Ultra3 |
| Hard Disk Drive: | HP
BF01885A34
, Firmware: 3BF2
, Interface: Ultra3SCSI Maxtor® Atlas 10K 9WLS , Firmware: UCH0 , Interface: Ultra320 SCSI |
| System: | HP ProLiant ML350 |
| Test Kit: | Diskkit 4.03.04 - 01-29-2003 |
Config Notes
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, security erase. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape. |
| Tape spanning supported |
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
LSI Logic, Inc.
4420 Arrowswest Dr
Colorado Springs , CO 80907
Voice: 719-533-7521
Website: www.lsilogic.com