HP Integrity rx1600
Network Server
Hewlett Packard Company
22 Sep 2004
78656

Tested and Approved with the following products:
Operating Systems:
  SUSE® Linux Enterprise Server 9 for Intel® Itanium® Processor

Product Description
1 to 2 Intel® Itanium® 2 processors clock frequency 1.0GHz (low voltage); 6.4GB/s system bus bandwidth DDR memory, 8.5GB/sec bandwidth 2 hot-plug SCSI disks 2 64bit/133MHz PCI-X slots, one full and 1 half length

Test Configuration
Product/Model:HP Integrity rx1600
CD/DVD:Teac®  DV-28E , ATAPI
CPU:2 Intel®  Itanium® 2 1.0 GHz
Hard Disk Drive:2 HP  ST336607LC , Ultra320 SCSI
Host Bus Adapter:LSI Logic®  Integrated 53C1030 , Ultra320 SCSI
Video Adapter:ATI®  ATI Radeon RV100 QY [Radeon 7000/VE]
BIOS:Firmware Revision: 1.10 [4341]; PAL_A Revision: 7.31/5.37; PAL_B Revision: 5.37; SAL Spec Revision: 3.01; SAL_A Revision: 2.00; SAL_B Revision: 1.10; EFI Spec Revision: 1.10; EFI Intel Drop Revision: 14.61; EFI Build Revision: 1.10; POSSE Revision: 0.10; ACPI Revision: 7.00; BMC Revision 2.33; IPMI Revision: 1.00; SMBIOS Revision: 2.3.2a; Management Processor Revision: E.02.26
Bus Type:2 64-bit PCI-X
Computer Type:Rack Mount
Floppy Type:1.44
Mother Board Revision:HP Proprietary
RAM:16 GB
Test Kit:System Test Kit 3.3.14

Product File Specifications

Config Notes
SLES 9 (IPF): Couldn't get reliable access to serial console of management unit (this isn't Linux related, though). Serial port ttyS1 proved to offer restricted functionality. USB 2.0 functionality not tested during certification.

Adapters and Drivers
AdapterDriver TypeFile NameDateSizeOS Version
LSI Logic®  Integrated 53C1030

The term Tested and Approved applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually Tested and Approved components may be exchanged for other Tested and Approved components. For more information on swapping Tested and Approved components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Hewlett Packard Company