|
 | AAR-2410SA
RAID Controller Adapter
IBM | 02 Sep 2004
77327 |
YES CERTIFIED with the following products:
Operating Systems:
Product Description
Adaptec Serial ATA RAID 2410SA is a 4 port native Serial ATA I/O processor-based RAID controller that supports Adaptec's advanced feature set, including Optimized Disk Utilization, Online Capacity Expansion and RAID Level Migration.
RAID Controller Adapter
| Product Name | AAR-2410SA |
| Adapter Bus Type: | PCI |
| Firmware: | N/A |
| BIOS: | 4.1-0 [Build 7235] |
| Interface: | Serial ATA |
| Channels: | 4 |
| Version: | A |
| Chipset: | Intel 80302 |
Primary Driver File(s):
| | | | | |
| | File Name: SCSIHD.CDM | File Version: 3.02c |
| | File Date: 09-Dec-2003 | File Size: 28306 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: AACRAID.HAM | File Version: 4.10 |
| | File Date: 11-Mar-2004 | File Size: 77625 |
| |
| |
File URL: |
Driver Support File(s)
| | | | | |
| | File Name: SCSIHD.DDI | File Version: 3.00 |
| | File Date: 22-Oct-2003 | File Size: 29164 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: AACRAID.DDI | File Version: 4.00 |
| | File Date: 17-Oct-2002 | File Size: 7646 |
| |
| |
File URL: |
Tested Configuration:
| Product Name | AAR-2410SA |
| Hard Disk Drive: | Maxtor®
MaXLine Plus II 250GB SATA
, Interface: Serial ATA
, Firmware: 1.0
, Capacity: 250GB Maxtor®
ATLAS V 18 WLS
, Interface: Ultra160 SCSI
, Firmware: 0230
, Capacity: 18.3 GB |
| System: | Dell
PowerEdge 4400 |
| Test Kit: | Diskkit 4.04.06 - 05-14-2004 |
Config Notes
| 'Hardware Hot Plug' supported but was not tested. |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|