|
 | AIC-7901
Device Driver / Host Bus Adapter
IBM | 16 Aug 2004
77314 |
YES CERTIFIED with the following products:
Operating Systems:
Product Description
AIC-7901 is a single channel Ultra 320 chip.
Primary Driver File(s):
| | | | | |
| | File Name: SCSIHD.CDM | File Version: 3.01c |
| | File Date: 22-Apr-2003 | File Size: 25079 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: SCSICD.CDM | File Version: 3.01a |
| | File Date: 22-Apr-2003 | File Size: 22027 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: NWTAPE.CDM | File Version: 2.00j |
| | File Date: 21-May-2003 | File Size: 66157 |
| |
| |
File URL: |
| | File Name: ADPU320.HAM | File Version: 3.00m |
| | File Date: 05-Sep-2003 | File Size: 216018 |
| |
| |
File URL: |
Driver Support File(s)
| | | | | |
| | File Name: SCSIHD.DDI | File Version: 2.00 |
| | File Date: 23-Jul-1998 | File Size: 7548 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: SCSICD.DDI | File Version: 2.00 |
| | File Date: 23-Jul-1998 | File Size: 7309 |
| | Checksum: -1 |
| |
File URL: |
| | File Name: NWTAPE.DDI | File Version: 1.00 |
| | File Date: 22-Oct-2001 | File Size: 6888 |
| |
| |
File URL: |
| | File Name: ADPU320.DDI | File Version: 2.0 |
| | File Date: 21-Aug-2003 | File Size: 7243 |
| |
| |
File URL: |
Host Bus Adapter(s)
| Product Name | AIC-7901 |
| Version: | B |
| Interface: | Ultra320 SCSI |
| Chipset: | AIC-7901x |
| BIOS: | 4.30.0 |
| Firmware: | 4.30.0 |
| Channels: | 1 |
Tested Configuration:
| CD/DVD: | PLEXTOR
CD-ROM PX-40TS
, Firmware: 1.13
, Interface: Ultra2SCSI LVD
COMPAQ
CD-224E
, Firmware: 9.0B
, Interface: Proprietary |
| Hard Disk Drive: | Maxtor®
Atlas V 18 WLS
, Firmware: 0200
, Interface: Ultra2SCSI LVD
Maxtor®
ATLAS IV 18 WLS
, Firmware: 0828
, Interface: Ultra2SCSI LVD |
| Tape Drive: | HP
C5683A
, Firmware: C005
, Interface: Ultra2SCSI LVD |
| System: | Proliant 8000
, Bus Type: PCI-ISA
, Memory: 1024 MB |
| Test Kit: | Diskkit 4.03.19 - 07-02-2003 |
Config Notes
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, quick erase, security erase, retension. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks. |
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, security erase. |
| Tape spanning supported |
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
Submission Files
|
