 | NC8000
Workstation Hewlett Packard Company | 30 Jun 2004
75832 |
Tested and Approved with the following products:
Operating Systems:
| SUSE® Linux Desktop 1.0 |
Product Description
NC8000
Test Configuration
| Product/Model: | NC8000 |
| CD/DVD: | Toshiba SD-C2612 , ATAPI |
| CPU: | Intel® Mobile Intel® Celeron® Processor 1.70 GHz |
| Hard Disk Drive: | Hitachi HTS726060M9AT00 , UltraATA-100 |
| Video Adapter: | ATI® MOBILITY™ RADEON™ 9600 |
| BIOS: | ROM famiy 68BAR, date 09/12/2003 F.06 |
| Computer Type: | Laptop |
| Floppy Type: | 1.44 |
| RAM: | 512 MB |
| Test Kit: | SUSE Certification Suite |
Adapters and Drivers
| Adapter | ||||||||||
| Broadcom® Broadcom BCM570X NetXtreme Gigabit Ethernet Adapter | Client OS assigned NDIS driver | |||||||||
Config Notes
| SLD 1.0: NEEDED: kernel boot parameter "acpi=oldboot" Graphics: only framebuffer mode supported NEEDED: manual adjustment of ethernet device detection NEEDED: "setterm -blank 0" in /etc/init.d/boot.local to avoid losing the local consoles by blanking. APM not properly supported PCMCIA _very_ slow in ethernet test internal modem is not supported by SLD 1.0 IRDA is not supported by SLD 1.0 |
The term Tested and Approved applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually Tested and Approved components may be exchanged for other Tested and Approved components. For more information on swapping Tested and Approved components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
Hewlett Packard Company
Website: www.hp.com