|
 |  | PowerVault 100T DDS-4
TAPE DRIVE
Dell Incorporated | 14 Jul 2004
75814 |
Tested and Approved with the following products:
Operating Systems:
Product Description
Please visit the website for Dell Incorporated at www.dell.com for detailed product information.
Primary Driver File(s):
| NWTAPE.CDM (
68900 bytes
15-Oct-2003 12:03 AM
2.00n)
|
| PEDGE3.HAM (
60084 bytes
11-Sep-2003 06:09 PM
7.01t)
|
Driver Support File(s)
| PEDGE3.DDI (
16104 bytes
26-Sep-2003 02:04 PM
na)
|
| NWTAPE.DDI (
6888 bytes
22-Oct-2001 08:54 AM
1.00)
|
Tape Drive
| Product Name | PowerVault 100T DDS-4 |
| Model | PV100T |
| Firmware: | 9050 |
| Interface: | SCSI-2 |
Test Configuration
| Host Bus Adapter: | Dell
PERC 4/Di RAID On Motherboard
, Adapter Bus Type: Integrated/Embedded
, Channels: 2
, Interface: Ultra320 SCSI |
| System: | Dell
PowerEdge 2600 /1-Xeon(tm) 2.4GHz
, BIOS: A10
, Memory: 512 MB |
| Test Kit: | Diskkit 4.03.25 - 09-16-2003 |
Config Notes
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, quick erase, security erase, retension. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks. |
| Tape spanning supported |
The term Tested and Approved applies only to the exact configuration documented in this bulletin.
For more information regarding the specific test configuration, please contact:
Dell Incorporated
1 DELL WAY
ROUND ROCK,
TX
78682
Voice: 1-800-BUY-DELL
|