PRIMERGY TX300 Network Server Fujitsu Siemens Computers 30 Jun 2004 75464 Tested and Approved with the following products: Operating Systems:   SUSE® Linux Enterprise Server 8 for x86 Product Description PRIMERGY TX300 compatible to PRIMERGY RX300 Test Configuration Product/Model: PRIMERGY TX300 CD/DVD: Mitsumi Electronics  SR243T1 CPU: 2 Intel®  Xeon™ 3.06 GHz Hard Disk Drive: 3 Maxtor  ATLASU320_36_SCA Host Bus Adapter: Adaptec  AIC-7902 Integrated Ultra320 SCSI Host Bus Adapter Video Adapter: ATI®  Integrated RAGE™ XL BIOS: PhoenixBIOS Version 4.06 Rev. 1.03.1409;BMC Firmware Version 001.012B Computer Type: Rack Mount Floppy Type: 1.44 Mother Board Revision: Fujitsu Siemens Computers System Board D1409 RAM: 4 GB Test Kit: SUSE Certification Suite Product File Specifications Config Notes SLES 8 - SP2a: * Boot medium for initial installation: United Linux 1.0 SP2a CD * NEEDED: kernel boot parameter "acpi=off" * BIOS (cf. inventory file): PhoenixBIOS Version 4.06 Rev. 1.03.1409; BMC Firmware Version 001.012B * Serial ports o Needed: nonstandard BIOS settings to activate ttyS0: "Serial 1" disabled, "Serial 2" o ttyS1 is not available. Adapters and Drivers Adapter Driver Type File Name Date Size NetWare Version Adaptec  AIC-7902 Integrated Ultra320 SCSI Host Bus Adapter Broadcom®  Integrated BCM 5704 Gigabit Ethernet Controller The term Tested and Approved applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually Tested and Approved components may be exchanged for other Tested and Approved components. For more information on swapping Tested and Approved components, please access the following web page: http://developer.novell.com/devres/system/policy/exchange.htm For more information regarding the specific test configuration, please contact: Fujitsu Siemens Computers FSC EP PS LE3 Buergermeister-Ulrich-Str. 100 Augsburg GERMANY Voice: 631-342-6000 Fax: 631-342-6800 Website: http://www.fujitsu-siemens.com/