 | ProLiant DL360G2
Network Server Hewlett Packard Company | 30 Jun 2004
75323 |
Tested and Approved with the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 8 for x86 |
| SUSE® Linux Enterprise Server 7 for IA-32 |
| SUSE® Linux 8.0 |
Product Description
ProLiant DL360G2
Test Configuration
| Product/Model: | ProLiant DL360G2 |
| CD/DVD: | HP CD-224E |
| CPU: | Intel® Pentium III 1.40 GHz |
| Hard Disk Drive: | 2 HP BD01864552 |
| Host Bus Adapter: | HP Compaq Integrated Smart Array 5i Controller |
| Video Adapter: | ATI® Integrated RAGE™ XL |
| BIOS: | Compaq BIOS P26 03/19/2002 |
| Computer Type: | Rack Mount |
| Floppy Type: | 1.44 |
| Mother Board Revision: | Compaq |
| RAM: | 256 MB |
| Test Kit: | SUSE Certification Suite |
Product File Specifications
Config Notes
| SLES 7 * Certified for Kernel 2.4.18 + Patch-CD2 o NEEDED: manual Ethernet driver entries in /etc/modules.conf: alias eth0 bcm5700; alias eth1 bcm5700. * Certified for Kernel 2.4.18 + Patch-CD3 o NEEDED: disable DMA on CD-ROM drive to avoid System CRASHES. |
| SLES 8 * NEEDED: kernel boot parameters "apic" and "acpi=oldboot". |
| SLES 8 - SP2a * NEEDED: kernel boot parameter "acpi=oldboot". * YaST2 installation can't identify /dev/cciss/c0d0 as first HDD and therefore creates a faulty Bootloader GRUB config: /boot/grub/{devices,menu.lst}. This turns the system unable to boot from /dev/cciss/c0d0. Workaround: use the rescue system to adapt these files ( /dev/cciss/c0d0 should be GRUB drive (hd0) ) and invoke "grub-install /dev/cciss/c0d0" to properly re-install GRUB. |
| SLES 8 - SP3 * NEEDED: update kernel to "HP update kernel k_smp-2.4.21-198" immediately after initial installation of UL1 + SP3. |
Adapters and Drivers
| Adapter | Driver Type | File Name | Date | Size | NetWare Version | ||||
| HP Compaq Integrated Smart Array 5i Controller | |||||||||
| HP HP NC7780 Gigabit Ethernet Adapter | |||||||||
The term Tested and Approved applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually Tested and Approved components may be exchanged for other Tested and Approved components. For more information on swapping Tested and Approved components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
Hewlett Packard Company