 | xSeries 365 Type 8861-1RZ
Network Server IBM | 30 Jun 2004
75252 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® Standard Server v8.0 |
| SUSE® LINUX Enterprise Server 8 for x86 |
Product Description
xSeries 365 Type 8861-1RZ
Tested Configuration:
| Computer Type: | Rack Mount |
| BIOS: | RDJT15AUS, Version 1.00, date 10/21/2003 |
| CPU: | 2 Intel® Xeon® 2.0 GHz |
| RAM: | 2048 MB |
| Video Adapter: | ATI® RADEON™ VE |
| Host Bus Adapter: | LSI Logic® LSI53C1030 Ultra 320 SCSI |
| Hard Disk Drive: | Fujitsu MAP3367NC , Ultra320 SCSI |
| CD/DVD: | LG CRN-8245B , ATAPI |
| Floppy Type: | 1.44 |
| Test Kit: | SUSE Certification Suite |
Config Notes
| SLES 8 - SP3 NEEDED: kernel boot parameter "apic". Graphics setup from within YaST2 during installation must be skipped in order to avoid a crash. Instead: configure the text console mode as 80x25 (boot parameter "vga=normal")and reboot (the autoconfigured framebuffer text console would get LOST after each XFree86 run. 80x25 mode is not affected). now invoke the sax2 config utility from an 80x25 text console as follows: sax2 -m 0=vesa |
| SL Standard Server 8 - SP3 NEEDED: kernel boot parameter "apic". Graphics setup from within YaST2 during installation must be skipped in order to avoid a crash. Instead: configure the text console mode as 80x25 (boot parameter "vga=normal")and reboot (the autoconfigured framebuffer text console would get LOST after each XFree86 run. 80x25 mode is not affected). now invoke the sax2 config utility from an 80x25 text console as follows: sax2 -m 0=vesa To update your SL Standard Server 8 installation by means of United Linux 1.0 SP3, mount CD 1 of this service pack somewhere and invoke the script /my-mountpoint-of-SP3-CD1/install.sh. |
Adapters and Drivers
| Broadcom® Integrated BCM 5704 Gigabit Ethernet Controller | |||||||||
| LSI Logic® LSI53C1030 Ultra 320 SCSI | |||||||||
| ATI® RADEON™ VE | |||||||||
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com