 |  | 64-bit 66 Mhz PCI Fibre Channel Host Adapter
Fibre Channel Adapter Hewlett Packard Company | 11 Jun 2004
75176 |
Tested and Approved with the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 1 for NetWare® 6.5 |
| NetWare® 6 Support Pack 4 for NetWare® 6 |
Product Description
64-bit 66 Mhz PCI Fibre Channel Host Adapter.
Primary Driver File(s):
| CPQFC.HAM ( 193725 bytes 08-Mar-2004 03:55 AM 1.00) |
| CPQSHD.CDM ( 116063 bytes 22-Mar-2004 03:02 AM 2.02) |
Driver Support File(s)
| CPQFC.DDI ( 5733 bytes 08-Mar-2004 03:55 AM 1.00) |
| CPQSHD.DDI ( 8566 bytes 22-Mar-2004 03:02 AM 2.00) |
Host Bus Adapter(s)
| Product Name | 64-bit 66 Mhz PCI Fibre Channel Host Adapter |
| Version: | 0 |
| Interface: | SCSI-2 |
| Adapter Bus Type: | PCI |
| Chipset: | a0fc |
| BIOS: | a |
| Firmware: | 2.60 |
Test Configuration
| CD-ROM Drive: | SC-140C , Interface: ATAPI , Firmware: cq04 |
| Hard Disk Drive: | HP BD01862376 , Interface: Ultra160 SCSI , Firmware: BCJG , Capacity: 18.2 GB |
| System: | HP Proliant ML570 G2 Xeon™ 3.0 GHz , BIOS: Compaq 12/31/99 , Memory: 2048 MB , Bus Type: PCI-ISA |
| Test Kit: | Diskkit 4.03.34 - 01-26-2004 |
Config Notes
| 'Hardware Hot Plug' supported but was not tested. |
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Hewlett Packard Company
Your local Hewlett-Packard
representative
,