 |  | Quantum SDLT600
TAPE DRIVE Quantum Corporation | 19 May 2004
75050 |
Tested and Approved with the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 1.1 for NetWare® 6.5 |
Product Description
The SDLT600 is a high performing, midrange tape drive. Quantum's SDLT600 provides 600GB of compressed capacity with 36 MB/Second native throughtput (72 MB/Second compressed); the SDLT600 sets a new benchmark for tape drive capacity and performance.
Tape Drive
| Product Name | Quantum SDLT600 |
| Model | SDLT600 |
| Firmware: | 1414 |
| Interface: | Ultra160 SCSI |
Primary Driver File(s):
| DLTTAPE.CDM ( 48464 bytes 22-Mar-2004 03:19 PM 3.01) |
| ADPT160M.HAM ( 159349 bytes 21-Feb-2003 04:36 PM 18.21m) |
Driver Support File(s)
| DLTTAPE.DDI ( 11372 bytes 22-Mar-2004 02:46 PM 3.01) |
| ADPT160M.DDI ( 7359 bytes 20-May-2002 02:56 PM 2.00) |
Test Configuration
| Host Bus Adapter: | Adaptec ASC-39160 Ultra160 SCSI Card , PCI , Ultra160 SCSI |
| System: | Compaq Compaq ProLiant DL360 |
| Test Kit: | Diskkit 4.03.34 - 01-26-2004 |
Config Notes
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, quick erase, security erase, retension. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks. |
| Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, security erase. |
| Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, locate data blocks. |
| Tape spanning supported |
The term Tested and Approved applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually Tested and Approved components may be exchanged for other Tested and Approved components. For more information on swapping Tested and Approved components, please access the following web page:
http://developer.novell.com/devres/system/policy/exchange.htm
For more information regarding the specific test configuration, please contact:
Quantum Corporation
4001 Discovery Drive
Suite 1100
Boulder, CO 80302
Voice: 720-406-5802
Fax: 720-406-5975