[an error occurred while processing this directive]
![]() |
Kyocera Mita FS-1010
Printer Kyocera Corporation |
12 Mar 2002 66535 |
| Tested and Approved with the following Novell products: |
| NetWare 5.1 | NetWare 6 |
| Product Description |
| The Kyocera Mita FS-1010 is a 14 page per minute, 600 dpi, monochrome laser printer with 16MB of standard memory (expandable to 144MB) and a 200 MHz PowerPC 405CoreASIC processor. KPDL2 (Kyocera's PostScript Level 2 emulation), PCL6 and four other printer emulations are supported. The FS-1010 features Kyocera's unique cartridge-free Ecosys Technology for environmentally friendly and low cost per page printing. The low cost per page and high quality printing make the FS-1010 an excellent personal or shared printer. |
| Test Configuration |
| Product/Model/Rev | Kyocera Mita FS-1010/Rev. FS-1010 | |
| Printer Configuration Software | Kyocera Mita Print Monitor | |
| Printer Driver | Kyocera Mita FS-1010 KX | |
| Printer Interfaces | Bi-directional Parallel | |
| Ethernet 100Base-T | ||
| Ethernet 10Base-T | ||
| Ethernet BNC | ||
| Universal Serial Bus | ||
| Printer Memory | 16 MB | |
| Printer Type | Monochrome Laser Printer | |
| Tested Printer Modes | LPR/LPD | |
| QServer-Mode | ||
| Tested Transport Protocol | IPX | |
| SPX | ||
| TCP | ||
| UDP | ||
| Uses or Stores NDS Records | Yes |
| Supported Configurations |
| Fonts | 80 TrueType fonts | |
| Printer Resolution | 600 DPI | |
| Printing Languages | PCL 6 | |
| PostScript II | ||
| Supported Protocol(s) | ARP | |
| AppleTalk | ||
| DHCP | ||
| EtherTalk | ||
| FTP | ||
| HTTP | ||
| IPP | ||
| LPD | ||
| LPR | ||
| Microsoft WINS | ||
| NDPS | ||
| NDS | ||
| NetBEUI | ||
| NetBIOS | ||
| RARP | ||
| SNMP |
| Configuration Note(s) |
| LPR/LPD printer used during testing: FS-1010 by Kyocera | |
| NDPS Client Library Version 1.5 | |
| Qserver-Mode printer used during testing: FS-1010 by Kyocera | |
| Tested with BROKER.NLM Version 3.0 Revision a | |
| Tested with NDPSM.NLM Version 2.20 Revision k |
| The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: |
| Kyocera Corporation |
| 2-14-9 Tamagawadai |
| Setagaya-ku |
| Tokyo 158-8610 |
| JAPAN |
| Voice: 03-3708-3858 |
| Toll Free: 03-3708-0423 |
| Website: http://www.kyocera.com |
[an error occurred while processing this directive]