|
 |
 |
X2e Canon GP200-216 (PCL)
Print Server
Electronics for Imaging, Inc.
|
6 Mar 1998
38300 |
| Tested and Approved with the following Novell products: |
| NDPS Port Handler for NetWare Servers(v1.00) |
NDPS Printer Devices Subsystem for NetWare Servers(v1.00) |
| NetWare(v3.2) |
NetWare (v3.12) |
| NetWare (v4.11) |
NetWare Print Server .NLM(v3.76) |
| NetWare Print Server .NLM(v4.10) |
|
| The Fiery X2e Controller is an embedded print controller that enables a monochrome digital copier to produce high quality Fiery prints. Ideal for corporate workgroups and network environments. The Fiery X2e prints output at 600 x 600 dpi resolution on all engine supported paper sizes. The controller features RIP-While-Print and has PCL standard and a PostScript option is available. | |
| Product/Model/Rev | X2e Canon GP200-216 (PCL)/X2e Canon GP200-216(PCL)/Rev. 1.0 | |
| Device Type | Print Server | |
| Enhanced Security Reset Capability | Not Supported | |
| Fonts | 46 PCL Fonts | |
| Frame Type | Ethernet_802.2, Ethernet_802.3,Ethernet_II, Ethernet_SNAP,Token Ring, Token Ring_SNAP | |
| LAN Configuration | Ethernet, Token Ring | |
| Language | Postscript Level 3, PCL 5e | |
| Memory | 32MB upgradeable to 64MB | |
| NEST Enabled | Yes | |
| Ports | Parallel (Standard or ECP mode) | |
| Supported Protocol(s) | TCP/IP, IPX/SPX, AppleTalk | |
| Speed | 20 PPM | |
| Vendor Software | Web Tools, Downloader, Spooler | |
| Tested Printing Mode | NDPS Queue Mode | |
| NDPS RP Mode | |
| Nprinter | |
| Pserver | |
| Rprinter | |
| Resolution | 600x600 dpi | |
| Print Server Notes: | |
| 1) Print Server cannot be dynamically administered from Pconsole | |
| 2) Print Server cannot be logged out from Pconsole | |
| 3) Supports both Novell Directory Services and Bindery modes on NetWare 4.X servers | |
| 4) Supports encrypted logins | |
| Remote Printer Notes: | |
| 1) Not Supported | |
|
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: | |
| Electronics for Imaging, Inc. |
| 303 Velocity Way |
| Foster City, CA, 94404 |
| Voice: (650)-357-3500 |
| Fax: (650) 357-3907 |
|