|
 |
 |
Extended Systems 2941 ExtendNet 100s
Printer/Print Server
EXTENDED SYSTEMS INC
|
21 Oct 1997
34840 |
| Tested and Approved with the following Novell products: |
| NDPS Port Handler for NetWare Servers(v1.00) |
NDPS Printer Devices Subsystem for NetWare Servers(v1.00) |
| NetWare (v3.12) |
NetWare (v4.11) |
| NetWare Print Server .NLM(v3.76) |
NetWare Print Server .NLM(v4.10) |
| Extended Systems ExtendNet 100s (ESI-2941) is a multi-protocol network print server which simultaneously supports Novell NetWare and NDS, TCP/IP, Windows NT, and EtherTalk. Available for Ethernets, ExtendNet 100s connects up to 2 printers (1 high-speed, bi-directional, IEEE-1284 parallel port and 1 serial port) for both 10BASE-T and 100BASE-T network connections. ExtendNet 100s also supports packet signatures, checksums, aliasing, load balanced printing, dedicated print servers and remote printer modes, encrypted passwords, automatic file server reattachment, forms printing and automatic font downloading. ExtendNet 100s delivers built-in compatibility with your choice of enterprise, LAN or user management tools. Our Open Management Architecture provides the ability to manage printers from any PC-based SNMP management application (like Novell ManageWise and HP OpenView) with unprecedented ease and vision. We provide a complete set of utilities designed to simplify the management of printing resources. ExtendView utilities allow you to easily install, configure and control your ExtendNet 100s print servers. ExtendView also provides system, network and printer status information. By using the NWAdmin snap-in DLL, ExtendView for NDS, ExtendNet 100s print servers can be installed, configured and managed - all from within NWAdmin. No need to use separate proprietary solutions to set up and maintain your printing network. As your network changes and grows, the ExtendNet 100s is upgr | |
| Product/Model/Rev | Extended Systems 2941 ExtendNet 100s/ESI-2941A/Rev. 5.13a | |
| Device Type | External Ethernet Print Server | |
| Fonts | N/A | |
| Frame Type | 802.2, 802.3, Ethernet_SNAP, Ethernet_II | |
| LAN Configuration | 100/10 Mbit Ethernet Twisted-pair (UTP) RJ45 (10BASE-T and 100BASE-T) | |
| Language | Postscript, PCL, and Automatic Language Switching | |
| Memory | Flash Memory | |
| Tested Protocol(s) | ETHERNET_802.3 | |
| Resolution | N/A | |
| Speed | 140K bytes/sec sustained throughput | |
| Tested Printing Mode | 1 NDPS Queue Mode | |
| Nprinter | |
| Pserver | |
| Rprinter | |
| Print Server Notes: | |
| 1) Print Server cannot be dynamically administered from Pconsole | |
| 2) Print Server cannot be logged out from Pconsole | |
| 3) Supports both Directory Services and Bindery modes on NeteWare 4.X servers | |
| 4) Supports encrypted logins | |
| Remote Printer Notes: | |
| 1) Does not support form feeds | |
| 2) Mark top of form capability is not supported | |
| 3) Supports offline capability | |
| 4) Supports out of paper notification | |
|
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact: | |
| EXTENDED SYSTEMS INC |
| 5777 N MEEKER AVE |
| |
| BOISE, ID, 83713 |
| Voice: 208-322-7575 |
| Fax: 208-327-5006 |
| Website: www.extendsys.com |
|