 | ETERNUS LT40 SAS LTO3
TAPE DRIVE Fujitsu | 23 Sep 2009
126724 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 11 for x86 |
Product Description
The ETERNUS LT40 is an ultra compact LTO tape library with up to 24 media slots and up to two drives on two height units. The new ETERNUS LT40 systems are connected via SCSI, SAS or FibreChannel interface to the server. The ETERNUS LT40 magnetic tape systems family is optimized for low power consumption, the use of environmentally friendly materials, as well as high and easy scalability. The ETERNUS LT40 is equipped with LTO technology, which is synonymous with high capacity, high speed and very low media costs. The tape library offers a storage capacity of 38.4 TB (LTO4 compressed) in just two height units. The new ETERNUS LT40 systems support either one or two LTO3 HH (half height) SCSI or SAS drives as well as LTO4 HH drives with SAS or FibreChannel interface. The base configuration includes 12 slots. Because all 24 slots are already built in the other 12 slots can be easily activated via a software license. Like all SME products from FUJITSU TECHNOLOGY SOLUTIONS, the ETERNUS LT40 is also easy to use, very reliable and extremely good value. For further information visit: http://ts.fujitsu.com/products/storage/tape/eternus/
Primary Driver File(s):
Driver Support File(s)
Tape Drive
| Product Name | ETERNUS LT40 SAS LTO3 |
| Firmware: | Q25B |
| Interface: | Serial SCSI (SAS) |
Tested Configuration
| Host Bus Adapter: | LSI Logic® LSI SAS3442E-R , Adapter Bus Type: PCI Express 8X , Interface: Serial SCSI (SAS) |
| System: | Fujitsu PRIMERGY® RX300 S5 |
| Test Kit: | DiskKit 5.01.29 - 2009-04-01 |
Config Notes
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY