ETERNUS LT40 SAS LTO4
TAPE DRIVE
Fujitsu		09 Sep 2009
126683

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 10 for AMD64® & Intel® EM64T®     Service Pack 2 for SUSE® SLES 10

Product Description
The ETERNUS LT40 is an ultra compact LTO tape library with up to 24 media slots and up to two drives on two height units. The new ETERNUS LT40 systems are connected via SCSI, SAS or FibreChannel interface to the server. The ETERNUS LT40 magnetic tape systems family is optimized for low power consumption, the use of environmentally friendly materials, as well as high and easy scalability. The ETERNUS LT40 is equipped with LTO technology, which is synonymous with high capacity, high speed and very low media costs. The tape library offers a storage capacity of 38.4 TB (LTO4 compressed) in just two height units. The new ETERNUS LT40 systems support either one or two LTO3 HH (half height) SCSI or SAS drives as well as LTO4 HH drives with SAS or FibreChannel interface. The base configuration includes 12 slots. Because all 24 slots are already built in the other 12 slots can be easily activated via a software license. Like all SME products from FUJITSU TECHNOLOGY SOLUTIONS, the ETERNUS LT40 is also easy to use, very reliable and extremely good value. For further information visit: http://ts.fujitsu.com/products/storage/tape/eternus/

Primary Driver File(s):
File Name: mptscsih.koFile Version: 3.04.06-suse
File Date: 06-May-2008File Size: 69160
Checksum: f0e7ebe13c03bf8fcdb6c041e3614ea0
File URL:
File Name: mptbase.koFile Version: 3.04.06-suse
File Date: 06-May-2008File Size: 134296
Checksum: 30611f1b706643e784615302123da609
File URL:
File Name: mptsas.koFile Version: 3.04.06-suse
File Date: 06-May-2008File Size: 56280
File URL:

Driver Support File(s)

Tape Drive
Product NameETERNUS LT40 SAS LTO4
Firmware:U24B
Interface:Serial SCSI (SAS)

Tested Configuration
Host Bus Adapter:LSI Logic®  LSI SAS3442E-R , Adapter Bus Type: PCI Express 8X , Interface: Serial SCSI (SAS)
System:Fujitsu  PRIMERGY® RX300 S4
Test Kit:DiskKit 5.01.27 - 2007-06-27

Config Notes

Referenced Bulletins
103280

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn   33106
GERMANY