PRIMERGY® TX300 S3
Network Server
Fujitsu
21 Jul 2009
126326

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 10 for x86


Product Description
Are you looking for business continuity, especially for your core business applications? Our TX300 servers provide peace of mind when choosing a suitable server platform, because their set of integrated redundancy and hot-plug features assures continuous operation of the platform and thus high application reliability. It is offering the breakthrough performance features of leading edge Intel® Dual-/Quad-Core Xeon® CPUs embedded in a powerful design with an 8-port SAS controller and fast PCIe links and PCI-X busses. Continuity is assured with the hot-plug power supply, hot-plug PCIe, hot-plug redundant fans, RAID 5 embedded and redundant dual LAN features. For your high capacity needs, PRIMERGY TX300 S3 provides 2 memory banks with 2 branches each for memory mirroring with up to 32 GB PC2-5300F (667 MHz) RAM memory for enhancing data transfer throughput. And the system only needs a few additional options to meet the highest demands, such as clustering or disaster-tolerant setup. For business-critical remote sites, the PRIMERGY TX300 S3 is the right platform. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=3a415401-73fa-4cec-b7b5-94fadb61adfd

Tested Configuration:
Computer Type:Tower
Mother Board Revision:D2129
BIOS:PhoenixBIOS 4.06 Rev. 1.03.2129
CPU:2 Intel®  Dual-Core Xeon® Processor 5160 3.00 GHz
RAM:8 GB
Bus Type:2 Serial
3 USB Ports
2 64-bit/133MHz PCI-X
2 PCI Express X4
PCI Express X8
Video Adapter:Matrox®  MGA G200e
Host Bus Adapter:LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Intel®  Integrated 6321ESB ICH , IDE
Hard Disk Drive:3 Seagate®  ST373454SS Cheetah 15.4-SAS , Serial SCSI (SAS)
CD/DVD:LG  GCC-4244N
Floppy Type:1.44
Test Kit:System Certification Kit 6.0.16


Config Notes
This bulletin was released for changing vendor to Fujitsu. Please note that for full support on the listed OS release a special support contract may be necessary. The system is fully supported on the most current service pack release.
Please use the ServerStart CD supplied with the system to configure and install it in order to achieve a certified environment.

Referenced Bulletins
86589

Adapters and Drivers
Broadcom®  Broadcom NetXtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: tg3.ko
File Date: 03-Jul-2006File Size: 119376
Checksum: ac78713bae64a254e97415bb6b9383a7

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: megaraid_sas.ko
File Date: 03-Jul-2006File Size: 41188
Checksum: 2fc00386b93c6055aa7a5b54a3036a62

Intel®  Integrated 6321ESB ICH
Driver Type: HBA DriverFile Name: ata_piix.ko
File Date: 03-Jul-2006File Size: 30032
Checksum: 64fdc6c99024eea46b44b8116affe8ed

Driver Type: HBA DriverFile Name: piix.ko
File Date: 03-Jul-2006File Size: 29816
Checksum: 23d4be235a64acbdb83bdaff3977a635

Matrox®  MGA G200e

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg   86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html