 | FibreCAT TX08 FC LTO4
TAPE DRIVE Fujitsu Siemens Computers | 13 Oct 2008
103162 |
YES CERTIFIED with the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for x86 Service Pack 2 for SUSE® SLES 10 |
Product Description
The FibreCAT TX08 from Fujitsu Siemens Computers is a compact and extremely reliable tape automation system which enables the cost-effective entry into the FibreCAT TX family for small and midsized companies. The FibreCAT TX08 is based on proven LTO technology, which provides large capacity, high speed and very small media costs. Depending on your individual requirements you can either order it with an LTO-2 or LTO-3 or LTO-4 half height drive. It has 2 magazines with 4 slots inclusive one mail slot for input and output of individual cartridges. The FibreCAT TX08 is only one Rack Unit high whereas it offers up to 12.8 Terabyte compressed storage capacity when equipping it with eight LTO-4 cartridges. Additional information: http://www.fujitsu-siemens.com/products/storage/tape/fibrecat/fibrecat_tx08.html
Primary Driver File(s):
| File Name: lpfc.ko | File Version: 0:8.2.0.22 | |||||
| File Date: 06-May-2008 | File Size: 342308 | |||||
| Checksum: d10d81ebc4cb7984b9af928dc783ec58 | ||||||
| File URL: | ||||||
Driver Support File(s)
Tape Drive
| Product Name | FibreCAT TX08 FC LTO4 |
| Firmware: | V22B |
| Interface: | FibreChannel |
Tested Configuration
| Host Bus Adapter: | Emulex Corporation LPe11002 Dual Channel PCI-e 4Gb/s Fibre Channel , Adapter Bus Type: PCI Express 8X , Channels: 2 , Interface: FibreChannel |
| System: | FSC PRIMERGY® RX300 S4 |
| Test Kit: | DiskKit 5.01.27 - 2007-06-27 |
Config Notes
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu Siemens Computers
FSC IP STB
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY