 | QLA2342 Dual Channel 2Gb Fibre Channel to 133MHz PCI-X HBA
Device Driver / Host Bus Adapter QLogic Corporation | 11 Mar 2008
100745 |
YES CERTIFIED with the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 7 for NetWare® 6.5 |
Product Description
Based on QLogic's award-winning Fibre Channel architecture, the SANblade QLA2342 is a 64-Bit, 66 MHz PCI/133 MHz PCI-X to 2-Gigabit Fibre Channel Host Bus Adapter. Targeted specifically for Storage Area Network (SANs) and server clustering environments, the SANblade QLA2342 has been optimized for peak performance and real-world scalability.
Primary Driver File(s):
| File Name: SCSIHD.CDM | File Version: 3.03h | |||||
| File Date: 09-Jan-2007 | File Size: 34414 | |||||
| Checksum: -1 | ||||||
| File URL: | ||||||
| File Name: QL2X00.HAM | File Version: 7.00a | |||||
| File Date: 26-Feb-2008 | File Size: 757704 | |||||
| File URL: | ||||||
Driver Support File(s)
Host Bus Adapter(s)
| Product Name | QLA2342 Dual Channel 2Gb Fibre Channel to 133MHz PCI-X HBA |
| Version: | 35 G |
| Interface: | FibreChannel |
| Bus Type: | 64-bit/133MHz PCI-X |
| Chipset: | ISP2312 |
| BIOS: | 1.54 |
| Firmware: | 3.03.23 |
| Channels: | 2 |
Tested Configuration:
| Hard Disk Drive: | 2 Seagate® ST336854FC , Interface: FibreChannel |
| Switching System: | QLogic SANbox 5802V , Interface: FibreChannel , Firmware: 6.9.0.15.0 , Switch Speed: 8Gb , Switch Ports: 20 |
| Test Kit: | Diskkit 4.05.11 - 04-23-2007 |
Config Notes
Referenced Bulletins
100630
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
26650 Aliso Viejo Parkway
P.O. Box 5033
Aliso Viejo , CA 92656
Voice: 949-389-6000
Fax: 949-389-6009
Website: http://www.qlogic.com